pub enum IpNet {
    V4(Ipv4Net),
    V6(Ipv6Net),
}
Expand description

An IP network address, either IPv4 or IPv6.

This enum can contain either an Ipv4Net or an Ipv6Net. A From implementation is provided to convert these into an IpNet.

Textual representation

IpNet provides a FromStr implementation for parsing network addresses represented in CIDR notation. See IETF RFC 4632 for the CIDR notation.

Examples

use std::net::IpAddr;
use ipnet::IpNet;

let net: IpNet = "10.1.1.0/24".parse().unwrap();
assert_eq!(Ok(net.network()), "10.1.1.0".parse());

let net: IpNet = "fd00::/32".parse().unwrap();
assert_eq!(Ok(net.network()), "fd00::".parse());

Variants

V4(Ipv4Net)

V6(Ipv6Net)

Implementations

Creates a new IP network address from an IpAddr and prefix length.

Examples
use std::net::Ipv6Addr;
use ipnet::{IpNet, PrefixLenError};

let net = IpNet::new(Ipv6Addr::LOCALHOST.into(), 48);
assert!(net.is_ok());
 
let bad_prefix_len = IpNet::new(Ipv6Addr::LOCALHOST.into(), 129);
assert_eq!(bad_prefix_len, Err(PrefixLenError));

Creates a new IP network address from an IpAddr and netmask.

Examples
use std::net::Ipv6Addr;
use ipnet::{IpNet, PrefixLenError};

let net = IpNet::with_netmask(Ipv6Addr::LOCALHOST.into(), Ipv6Addr::from(0xffff_ffff_ffff_0000_0000_0000_0000_0000).into());
assert!(net.is_ok());

let bad_prefix_len = IpNet::with_netmask(Ipv6Addr::LOCALHOST.into(), Ipv6Addr::from(0xffff_ffff_ffff_0000_0001_0000_0000_0000).into());
assert_eq!(bad_prefix_len, Err(PrefixLenError));

Returns a copy of the network with the address truncated to the prefix length.

Examples
assert_eq!(
    "192.168.12.34/16".parse::<IpNet>().unwrap().trunc(),
    "192.168.0.0/16".parse().unwrap()
);

assert_eq!(
    "fd00::1:2:3:4/16".parse::<IpNet>().unwrap().trunc(),
    "fd00::/16".parse().unwrap()
);

Returns the address.

Returns the prefix length.

Returns the maximum valid prefix length.

Returns the network mask.

Examples
let net: IpNet = "10.1.0.0/20".parse().unwrap();
assert_eq!(Ok(net.netmask()), "255.255.240.0".parse());

let net: IpNet = "fd00::/24".parse().unwrap();
assert_eq!(Ok(net.netmask()), "ffff:ff00::".parse());

Returns the host mask.

Examples
let net: IpNet = "10.1.0.0/20".parse().unwrap();
assert_eq!(Ok(net.hostmask()), "0.0.15.255".parse());

let net: IpNet = "fd00::/24".parse().unwrap();
assert_eq!(Ok(net.hostmask()), "::ff:ffff:ffff:ffff:ffff:ffff:ffff".parse());

Returns the network address.

Examples
let net: IpNet = "172.16.123.123/16".parse().unwrap();
assert_eq!(Ok(net.network()), "172.16.0.0".parse());

let net: IpNet = "fd00:1234:5678::/24".parse().unwrap();
assert_eq!(Ok(net.network()), "fd00:1200::".parse());

Returns the broadcast address.

Examples
let net: IpNet = "172.16.0.0/22".parse().unwrap();
assert_eq!(Ok(net.broadcast()), "172.16.3.255".parse());

let net: IpNet = "fd00:1234:5678::/24".parse().unwrap();
assert_eq!(Ok(net.broadcast()), "fd00:12ff:ffff:ffff:ffff:ffff:ffff:ffff".parse());

Returns the IpNet that contains this one.

Examples
let n1: IpNet = "172.16.1.0/24".parse().unwrap();
let n2: IpNet = "172.16.0.0/23".parse().unwrap();
let n3: IpNet = "172.16.0.0/0".parse().unwrap();

assert_eq!(n1.supernet().unwrap(), n2);
assert_eq!(n3.supernet(), None);

let n1: IpNet = "fd00:ff00::/24".parse().unwrap();
let n2: IpNet = "fd00:fe00::/23".parse().unwrap();
let n3: IpNet = "fd00:fe00::/0".parse().unwrap();

assert_eq!(n1.supernet().unwrap(), n2);
assert_eq!(n3.supernet(), None);

Returns true if this network and the given network are children of the same supernet.

Examples
let n4_1: IpNet = "10.1.0.0/24".parse().unwrap();
let n4_2: IpNet = "10.1.1.0/24".parse().unwrap();
let n4_3: IpNet = "10.1.2.0/24".parse().unwrap();
let n6_1: IpNet = "fd00::/18".parse().unwrap();
let n6_2: IpNet = "fd00:4000::/18".parse().unwrap();
let n6_3: IpNet = "fd00:8000::/18".parse().unwrap();

assert!( n4_1.is_sibling(&n4_2));
assert!(!n4_2.is_sibling(&n4_3));
assert!( n6_1.is_sibling(&n6_2));
assert!(!n6_2.is_sibling(&n6_3));
assert!(!n4_1.is_sibling(&n6_2));

Return an Iterator over the host addresses in this network.

Examples
let net: IpNet = "10.0.0.0/30".parse().unwrap();
assert_eq!(net.hosts().collect::<Vec<IpAddr>>(), vec![
    "10.0.0.1".parse::<IpAddr>().unwrap(),
    "10.0.0.2".parse().unwrap(),
]);

let net: IpNet = "10.0.0.0/31".parse().unwrap();
assert_eq!(net.hosts().collect::<Vec<IpAddr>>(), vec![
    "10.0.0.0".parse::<IpAddr>().unwrap(),
    "10.0.0.1".parse().unwrap(),
]);

let net: IpNet = "fd00::/126".parse().unwrap();
assert_eq!(net.hosts().collect::<Vec<IpAddr>>(), vec![
    "fd00::".parse::<IpAddr>().unwrap(),
    "fd00::1".parse().unwrap(),
    "fd00::2".parse().unwrap(),
    "fd00::3".parse().unwrap(),
]);

Returns an Iterator over the subnets of this network with the given prefix length.

Examples
let net: IpNet = "10.0.0.0/24".parse().unwrap();
assert_eq!(net.subnets(26).unwrap().collect::<Vec<IpNet>>(), vec![
    "10.0.0.0/26".parse::<IpNet>().unwrap(),
    "10.0.0.64/26".parse().unwrap(),
    "10.0.0.128/26".parse().unwrap(),
    "10.0.0.192/26".parse().unwrap(),
]);

let net: IpNet = "fd00::/16".parse().unwrap();
assert_eq!(net.subnets(18).unwrap().collect::<Vec<IpNet>>(), vec![
    "fd00::/18".parse::<IpNet>().unwrap(),
    "fd00:4000::/18".parse().unwrap(),
    "fd00:8000::/18".parse().unwrap(),
    "fd00:c000::/18".parse().unwrap(),
]);

let net: IpNet = "10.0.0.0/24".parse().unwrap();
assert_eq!(net.subnets(23), Err(PrefixLenError));

let net: IpNet = "10.0.0.0/24".parse().unwrap();
assert_eq!(net.subnets(33), Err(PrefixLenError));

let net: IpNet = "fd00::/16".parse().unwrap();
assert_eq!(net.subnets(15), Err(PrefixLenError));

let net: IpNet = "fd00::/16".parse().unwrap();
assert_eq!(net.subnets(129), Err(PrefixLenError));

Test if a network address contains either another network address or an IP address.

Examples
let net4: IpNet = "192.168.0.0/24".parse().unwrap();
let net4_yes: IpNet = "192.168.0.0/25".parse().unwrap();
let net4_no: IpNet = "192.168.0.0/23".parse().unwrap();
let ip4_yes: IpAddr = "192.168.0.1".parse().unwrap();
let ip4_no: IpAddr = "192.168.1.0".parse().unwrap();

assert!(net4.contains(&net4));
assert!(net4.contains(&net4_yes));
assert!(!net4.contains(&net4_no));
assert!(net4.contains(&ip4_yes));
assert!(!net4.contains(&ip4_no));


let net6: IpNet = "fd00::/16".parse().unwrap();
let net6_yes: IpNet = "fd00::/17".parse().unwrap();
let net6_no: IpNet = "fd00::/15".parse().unwrap();
let ip6_yes: IpAddr = "fd00::1".parse().unwrap();
let ip6_no: IpAddr = "fd01::".parse().unwrap();

assert!(net6.contains(&net6));
assert!(net6.contains(&net6_yes));
assert!(!net6.contains(&net6_no));
assert!(net6.contains(&ip6_yes));
assert!(!net6.contains(&ip6_no));

assert!(!net4.contains(&net6));
assert!(!net6.contains(&net4));
assert!(!net4.contains(&ip6_no));
assert!(!net6.contains(&ip4_no));

Aggregate a Vec of IpNets and return the result as a new Vec.

Examples
let nets = vec![
    "10.0.0.0/24".parse::<IpNet>().unwrap(),
    "10.0.1.0/24".parse().unwrap(),
    "10.0.2.0/24".parse().unwrap(),
    "fd00::/18".parse().unwrap(),
    "fd00:4000::/18".parse().unwrap(),
    "fd00:8000::/18".parse().unwrap(),
];

assert_eq!(IpNet::aggregate(&nets), vec![
    "10.0.0.0/23".parse::<IpNet>().unwrap(),
    "10.0.2.0/24".parse().unwrap(),
    "fd00::/17".parse().unwrap(),
    "fd00:8000::/18".parse().unwrap(),
]);

Trait Implementations

Returns a copy of the value. Read more
Performs copy-assignment from source. Read more
Formats the value using the given formatter. Read more
Returns the “default value” for a type. Read more
Formats the value using the given formatter. Read more
Converts to this type from the input type.
Converts to this type from the input type.
Converts to this type from the input type.
The associated error which can be returned from parsing.
Parses a string s to return a value of this type. Read more
Feeds this value into the given Hasher. Read more
Feeds a slice of this type into the given Hasher. Read more
This method returns an Ordering between self and other. Read more
Compares and returns the maximum of two values. Read more
Compares and returns the minimum of two values. Read more
Restrict a value to a certain interval. Read more
This method tests for self and other values to be equal, and is used by ==. Read more
This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason. Read more
This method returns an ordering between self and other values if one exists. Read more
This method tests less than (for self and other) and is used by the < operator. Read more
This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
This method tests greater than (for self and other) and is used by the > operator. Read more
This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more
Immutably borrows from an owned value. Read more
Mutably borrows from an owned value. Read more

Returns the argument unchanged.

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

The resulting type after obtaining ownership.
Creates owned data from borrowed data, usually by cloning. Read more
Uses borrowed data to replace owned data, usually by cloning. Read more
Converts the given value to a String. Read more
The type returned in the event of a conversion error.
Performs the conversion.
The type returned in the event of a conversion error.
Performs the conversion.